CATEGORIES
Contact Us

Tel: +86-755-33855915

Fax: +86-755-33855919

Mail: sales@stcforcable.com

Add: No.7 Xiuhua Road, Third Industrial Zone, Tangxiayong Community, Songgang Town, Baoan District, Shenzhen, Guangdong, China (Mainland)

Post: 518105

Home > Exhibition > Content

Method of crimping at both ends of Grey ribbon cables

Shenzhen STC Cable Manufacturer | Updated: Jul 11, 2017
Source:

(A) the same direction, the same bump [conventional pressure method]

The two IDC crimps have the same orientation and the bumps are the same. Triangle  of the red side of the conventional pressure method is also known as  one to one pressure method, eighty percent of the customers are using  this pressure method! 6-34P can be used automatic  pressing machine crimping, as shown in Figure A1: the above one for the  three-piece, the following one for the non-buckle two-piece! To three-piece direction of the bumps prevail!3893449649_840919659.jpg



















(B) the same direction, bumps back

Two IDC crimping heads in the same direction, bumps in the opposite direction. As shown in Figure A2: the above one for the three-piece, the following one is not buckle the two-piece! We will ask how bump how assured not how the same! Two-piece buckle buckle is the three-piece direction! Routine is to do three-piece, so here is the three-piece direction of the bumps prevail!3895281551_840919659.jpg
















(C) the same direction, the relative bump

The two IDC crimps are oriented in the same direction as the bumps are oriented. As shown in Figure A3: the above one for the three-piece, the following one is not buckle the two-piece! To three-piece direction of the bumps prevail! Need two-piece that would pay attention!3895281551_840919659.jpg












(D) a positive and negative, bumps consistent

The two IDC crimps are oriented in the opposite direction, the bumps are in the same direction. As shown in Figure B1: the above one for the three-piece, the following one is not buckle the two-piece! Routine is to do three-piece, so here is the three-piece direction of the bumps prevail!3895287719_840919659.jpg















(E) a positive and negative, bumps back

Two IDC crimping the opposite direction, the direction of the bumps, that is, the opposite meaning. As shown in Figure B2: the above one for the three-piece, the following one is not buckle the two-piece! Routine is to do three-piece, so here is the three-piece direction of the bumps prevail!

3895287719_840919659.jpg


(F) a positive and negative, bumps relative

The two IDC crimps are oriented in opposite directions, the bumps are oriented in opposite directions. As shown in Figure B3: the above one for the three-piece, the following one for the two-button without buckle! Routine is to do three-piece, so here is the three-piece direction of the bumps prevail!



3895287719_840919659.jpg










Feedback
Shenzhen STC Cable Manufacturer
Copyright © Shenzhen STC Cable Manufacturer All rights reserved.